Synthesis of UiO-66 with addition of HKUST-1 for enhanced adsorption of RBBR dye

Toxic dye removal, one of the most serious and common industrial pollutants released into natural water, is a critical issue for modern civilization. In this study, a series of UiO-66 composites was synthesized with addition of HKUST-1 using solvothermal method, which was used to remove RBBR dye. The structure, morphology and surface area of the composites were studied by several analyses. HK(5)/UiO-66 possessed a specific surface area of 557.63 m²/g and showed an adsorption capacity of 400 mg/g, higher than that of UiO-66 (261.92 mg/g) with a contact time of 50 min. Several adsorption parameters that influenced RBBR removal efficiency were investigated, such as pH, initial dye concentrations, and temperature. All the composites followed pseudo-first order kinetics and Langmuir isotherm adsorption. Moreover, the adsorption process occurred exothermically and spontaneously, indicating that the adsorption process was advantageous in terms of energy. The possible adsorption mechanism and cost analysis of the adsorbent were also studied in detail.     

Green synthesis and physical properties of crystalline silica engineering nanomaterial from rice husk (agriculture waste) at different annealing temperatures for its varied applications

Crystalline nano silica (SiO₂) was synthesized using a cost-effective eco-friendly method from agricultural waste material like rice husk. Polymer nanocomposite has been prepared using the sol-gel technique from crystalline nano silica using PVA as a polymer binder. Thermal analysis measurement is employed to investigate thermal stability. The XRD analysis shows the crystalline nature of silica is revealed to have characteristic peaks of SiO₂. The particle size was evaluated using Schererr's formula and found to be in the range of 21–31 nm. FTIR measurement shows the presence of O–Si–O (silane) bond formation. The PL measurement shows broad excitation prominently in the visible region. In the XRD pattern, a major peak of the Nanocomposite is observed at an angular position of 19.5° degree, which is more prominent than that of the PVA with the addition of 0.2 wt percent Nano silica to the PVA composite. SEM provides information on homogeneous distribution. This could be beneficial in terms of higher mechanical qualities as well as multifunctional properties. By hydrogen bonding, the PVA molecules are strongly linked to each SiO₂ nanoparticle as measured by FTIR. The stability of materials is confirmed by Zeta Potential and DLS. In the photoluminescence property of SiO₂-PVA crystalline Nano silica composite is excited using a radiation wavelength of 200 nm. The indirect bandgap was determined to be 4.28 eV which could be attributed to the 1100 °C annealing temperature. Such materials may be used as a semiconductor material obtained from a direct natural source, rice husk. Thus, in the present research structural, physical, and optical properties of crystalline nano silica and its polymer composite are explored, which leads us to prepare technological grads material from agricultural waste for varied applications including Agriculture to medical science.     

Synthesis and characterization of ternary nanocomposites of TiO2/rGO/CdS as an efficient catalyst for photo-degradation of methyl orange

Novel ternary composite photocatalysts have been successfully prepared by TiO₂ nanofibers, reduced graphene oxide, and CdS nanoparticles (TiO₂/rGO/CdS) by using electrospinning technique with easy chemical methods. The structures and their properties are examined by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and field-emission scanning electron microscope (FESEM). The structural characterization of the composite reveals that pure TiO₂ NFs and CdS NPs crystalline very well and the reduced graphene oxide is tightly composed with TiO₂ NFs and CdS Nps. The photodegradation of methyl orange (MO) under UV light illumination is significantly enhanced compared with that of bare materials. This ternary composite degrades methyl orange within 75 min. The enhanced photocatalytic degradation performance resulted from effective separation of e–h pairs with rGO sheets and also contributed for high rate degradation efficiency. This novel ternary composite has a potential application of wastewater purification and utilization for energy conversions.     

An amino trimethylene phosphonic acid-based chelated boric acid complex that works as a synergistic flame retardant for enhancing the flame retardancy of cotton fabrics

The chelating ligands of boric acid and amino trimethyl phosphonate prepared a novel flame retardant (BAP) for the cotton fabric. A stable chemical and coordination bond was formed on the surface of the cotton fibers by a simple three-curing finishing process to make the fabric exhibits excellent durable flame retardancy. Cotton fabrics' tensile strength and whiteness got substantially retained after BAP treatment. 90 g/L BAP-treated samples (3 curing times, 50 laundry cycles) showed good flame retardancy and durability, holding the largest limit oxygen index, 29.7%, and the shortest damage length, 61 mm. A condensed phase and gas phase synergistic flame retardant mechanism was concluded by thermogravimetric, cone calorimeter tests, and thermogravimetric infrared analysis.     

CoO纳米颗粒/石墨烯纳米纤维复合材料的制备及电化学性能

用石墨烯和Co(CH₃COO)₂·4H₂O作为原料,利用超声辅助法合成了锂离子电池的负极材料CoO纳米颗粒/中空石墨烯纳米纤维复合物.采用X射线衍射(XRD)确定材料的物相组成,采用扫描电子显微镜(SEM)和透射电子显微镜(TEM)观察材料的表面形貌和微观结构,采用X射线光电子能谱(XPS)确定材料的价态结构.采用循环伏安、恒电流充放电和交流阻抗谱表征材料的电化学性能.结果显示,在100 mA/g的电流密度下,循环了160次后,可逆容量仍超过800 mA/g,库仑效率保持在99%以上.该材料优异的电化学性能主要归因于石墨烯的中空纤维结构,中空内部可以容纳电解液,能直接将离子输送到颗粒表面,实现了离子的快速传输;二维中空纤维搭建成三维网络结构,实现了三维电子传导网络.     

钙钛矿太阳能电池电子传输层的制备及应用

目前,有机-无机杂化钙钛矿太阳能电池(PSC)的器件效率已经超过25%。电子传输层作为PSC中的重要组成部分在提取和传输光生电子,阻挡空穴,修饰界面,调节界面能级和减少电荷复合等方面起着关键作用。无机n型材料,例如TiO₂、ZnO、SnO₂和其他金属氧化物材料具有成本低和稳定性好的特点,经常在传统PSC中被用作电子传输层(ETL)。有机n型材料,例如富勒烯及其衍生物、萘二酰亚胺聚合物和小分子,具有良好的成膜性能及强的电子传输性能,经常在反式PSC中被用作ETL。本综述详细介绍了PSC中电子传输层的作用机理和制备方法;重点总结了金属氧化物材料、有机分子材料、复合材料和多层分子材料电子传输层和其改性手段的最新研究进展;最后,展望了电子传输层材料朝着高性能PSC的实际应用和发展前景。     

MOFs/水凝胶复合材料的制备及其应用研究

金属有机框架(MOFs)具有大量的孔隙结构和活性位点,在气体吸附、催化、医疗等领域均发挥了巨大的作用。MOFs是晶体粉末,具有脆性较大、在水中易分解和不易回收等缺点,从而限制了其应用。通过MOFs与柔性高分子的复合,特别是与水凝胶的复合,极大地改善了复合材料的柔顺性、可回收和可加工性等特性,进一步拓宽了MOFs的应用领域。本文详细阐述了基于水凝胶MOFs原位生成法、MOFs /水凝胶同时生成法和水凝胶包裹MOFs法等三种不同方法制备MOFs/水凝胶复合材料的研究进展,并对上述三种制备方法的特点及其产物特征进行了总结,进一步归纳了复合材料在生物医药、催化、废水处理和气体吸附等领域的应用。最后,对MOFs/水凝胶复合材料制备方法的改进和复合材料应用前景进行了深入讨论和展望。     

中性或弱酸性体系下锌基水系电池负极材料研究进展

锌具有原料丰富、质量轻便、金属导电性与延展性好以及理论比容量高等优势,可以作为绿色可充电电池的理想电极材料。其中,以中性或弱酸性水溶液为电解质、锌为负极的锌基水系电池具有安全性高、电池材料廉价无毒、制备工艺简单、环境友好等特点,在储能和动力电池领域具有极高的应用价值和发展前景。但电池充放电过程中伴随的锌枝晶、析氢、腐蚀、钝化等问题限制了其实际应用。本文综述了锌基水系电池负极存在的问题及当前的解决策略,并对其负极研究发展方向进行了展望。     

共轭微孔聚合物的制备与应用

共轭微孔聚合物(CMPs)是一类有机多孔聚合物,与常规共轭聚合物或多孔材料相比,其最大的特点是既有π共轭骨架又具有大量微孔。这类材料在解决能源和环境问题方面显示出巨大的潜力,已在气体吸附、非均相催化、发光材料、化学传感器、电能存储和生物杂化物等领域显示出巨大的应用前景。目前已开发出多种用于CMPs结构单元设计与合成的新方法,用于制备具有不同结构和特定性质的多种CMPs,有效推动了该领域的快速发展。本综述总结了CMPs的理论模型和结构设计,合成原理、常用合成方法和影响因素分析,以及CMPs在各领域的应用。     

Graphdiyne:A Versatile Material in Electrochemical Energy Conversion and Storage

Graphdiyne(GDY),which is composed of sp2-/sp-hybridized carbon atoms,has attracted increasing attention.In the structure of GDY,the existence of large triangular-like pores,well dispersed electron-rich cavities as well as a large π-conjugated structure endows GDY with a natural bandgap,fast electron/ion transport,and tunable electronic properties.These unique features make GDY competitive in areas of gas separation and capture,electronics,detectors,catalysts,biomedicine and therapy,and energy-related fields.Benefiting from the facile synthesis method,various GDY structures and GDY-based composites have been successfully prepared and show great potential in the practical application of energy storage and catalysis areas.Here,this review aims at providing a timely and comprehensive update on the preparation and application of GDY materials.The current development of GDY materials in various electrochemical fields especially in energy conversion,energy storage,and catalysis is mainly summarized.Moreover,the potential development prospects are also discussed.